The PLASMOIL® additives are made of vegetable oils and subjected to a clean electrical treatment, without any residue and with the ultimate property of reducing the energy consumption.

​

PLASMOIL® Bio (NSF H1, HX-1, M1) and MR series lubricant additives. The PLASMOIL® Bio and MR series are both 100% biodegradable.

​

The PLASMOIL line are modern components of maxi-lubricity for the formulation of modern lubricants, greases, and fuels of higher efficiency.

 

Description

The PLASMOIL show a unique combination of high viscosity and high polarity and provides simultaneously 
maxi-lubricity and oiliness, tackiness, dispersancy, VI improvement, anti-corrosion, lower friction and more. 

The PLASMOIL BIO is NSF registered H1, HX-1 and M1.
The PLASMOIL are honey-like products. 
The PLASMOIL are Reach compliant.
The PLASMOIL BIO and MR products are completely biodegradable (OECD 301D).

​

Properties   

Several properties are provided to a formulation: 

• Lower friction by extending the range of effectiveness from boundary to mild EP and by inducing, through thixotropy (sharp increase of viscosity at low shear) an earlier hydrodynamic regime.

• Synergetic effect of the load-carrying capacity of EP additives. 

• Higher adsorption capacity making it adequate for high temperature operations.

• Dispersion, which can be used for stabilizing nano-additives or particulates.

• Self-healing effect on rubbing surfaces by rolling down the asperities, rather than grinding them out.

• Anti-corrosion effect.

• Smooth lubrication, even bringing a reduction of noise. 

​

PLASMOIL are bio-components which combine the two antagonist properties of high polarity and thickness. Honey-like products, these are natural, safe, totally biodegradable, environmentally friendly, REACH compliant and provide outstanding lubricity in the boundary lubrication. 

​

PLASMOIL as natural substances, they do not show reversible reactions like esters can do. The PLASMOIL are particularly advantageous in high temperature operations (racing, gears, copper HT drawing, ...) and in emulsions applications. As natural oils, their molecular weights distributions are wide. Their strong and multiple points of polarity (adsorption) as well as their thixotropy are derived from our ultra-modern treatment based on a century of own experience. 

​

PLASMOIL products are used in a multitude of applications;

 

Applications & typical percentages of use

PLASMOIL needs to be blended @ >60°C.

Gear oils: 5% - 10% good shear stability

Drawing oils:  10% - 30% for higher viscosity

Cutting oils: % equivalent to its EP additives

Greases & chain oils:  15%-100%

Very high temperature operations:  Up to 100%

Milky soluble: 5% - 10%

Fuel optimizer: 0.25 to 1%

Engine oils: Friction modifier, 5 to 10%

​